In brief
- Ready-mix is batched at a central plant and delivered by transit mixer, so mix design and water-cement ratio stay controlled.
- Standard grades run from C20 to C40 (N/mm² at 28 days) and are checked by slump and cube tests.
- Consar operates 9 batching plants and 35+ transit mixers in Ghana, and owns and maintains its fleet.
Ready-mix concrete (RMC) is concrete batched at a central plant and delivered to a construction site by transit mixer. The batching plant controls the mix design, water-cement ratio, and admixture proportions under laboratory conditions. Site-mixed concrete depends on an operator shovelling aggregate and cement by eye. Ready-mix removes that variable.
Consar operates 9 batching plants and 35+ transit mixers across Ghana. Consar supplies ready-mix concrete to its own construction projects and to third-party clients. This is what that supply operation covers.
Concrete Batching Plants in Ghana: Coverage and Capacity
Consar's concrete batching plants cover Accra, Tema, and the broader Greater Accra Region. A batching plant draws aggregate, sand, cement, water, and admixtures from stockpiles and weighs each component to the mix design specification before loading the transit mixer drum.
Concrete begins hydrating the moment water contacts cement. Transit time between the batching plant and the pour location determines whether the concrete reaches the site within its workability window. Consar's plant locations keep transit times within that window for projects across the Accra-Tema corridor.
For projects outside this zone, Consar can deploy mobile batching plant capacity. The company operates both fixed and mobile batching plant configurations to support construction programmes across Ghana.

Concrete Mix Grades and Design Specifications for Ghana Projects
Project engineers specify concrete in Ghana by characteristic compressive strength — the strength the mix achieves at 28 days, measured in N/mm². Consar's batching plants produce design mixes across the standard grades used in Ghanaian construction:
- C20 (20 N/mm²): blinding concrete, non-structural fills
- C25 (25 N/mm²): residential slabs, footings, columns
- C30 (30 N/mm²): commercial floors, suspended slabs, structural frames
- C35 (35 N/mm²): high-load structural elements, transfer plates
- C40 (40 N/mm²): post-tensioned slabs, heavy-load foundations
A design mix specifies the proportions of Portland cement, coarse aggregate, fine aggregate, water, and admixture by weight. The batching plant weighs each material before loading. Controlled batching produces consistent strength, durability, and workability from one batch to the next. Site-mixed concrete uses volume batching: shovels and headpans. The result varies.
Quality Testing: Slump Tests, Cube Tests, and Concrete Supply Standards
Consar tests every concrete mix at the plant and on-site before the pour begins.
A fresh concrete test measures slump — the workability of the mix when it arrives at the pour location. A slump outside the specification means water was added in transit or the mix lost workability on the road. Consar's supervisors check slump on arrival at the construction site before the pour proceeds.
Consar's supervisors cast concrete cubes from fresh samples at the site and cure them in Consar's laboratory. The laboratory tests cubes at 7 days and 28 days to verify that the delivered mix achieves its specified characteristic compressive strength, following Ghana Standards Authority concrete specification requirements. These results go into the project's materials documentation.
This quality standard applies on every Consar construction site and on supply contracts where the client requires cube test records for their project QA documentation.

Large-Scale Ready Mix Concrete Supply in Ghana
Consar's batching plant capacity supports large construction programmes across the country.
The GNPC Head Office project, headquarters of Ghana National Petroleum Corporation, required structural concrete across multiple floors of a LEED-certified building, with each batch documented to meet LEED materials credits for recycled content and regional sourcing, as part of Consar's sustainability programme. The Meridian Port Services Phase II project at Tema required concrete for hardstanding areas and port infrastructure. The Accra Mall project required continuous ready mix concrete supply across a large commercial floor plate through the full structural frame programme.
Projects at this scale require a concrete supplier who can maintain output rate, batch consistency, and delivery frequency across multi-month pour programmes. A concrete supply operation that runs short of aggregate, loses a concrete truck or transit mixer to breakdown, or delivers a non-conforming mix on a critical pour halts the project.
Consar owns its transit mixer and batching plant fleet. Consar maintains and replaces its own equipment. No hire market dependence. Reliable delivery requires owning the fleet. On remote sites in northern Ghana or West Africa where hired concrete mixers do not exist, Consar's fleet goes where the project goes.
Ready Mix Concrete for Mine Sites and Civil Works in Ghana
Consar supplies concrete for mine site civil works and infrastructure projects across Ghana and West Africa.
Processing plant foundations, pump station bases, and mine accommodation village slabs require structural concrete batched to specification. On a remote mine site, site-mixed concrete produces inconsistent compressive strength and leaves no cube test records for the client's safety case. Consar has supplied concrete for construction at Newmont, AngloGold Ashanti, and Kinross operations in Ghana. The same batching and testing standards apply on a mine site as on a commercial building in Accra.
As a Ghanaian-owned contractor with four decades of construction experience, Consar treats ready mix concrete supply as a technical service with documented outputs, not a commodity delivery.
If you need ready-mix concrete supply in Ghana for a commercial, civil, mining, or infrastructure project, contact Consar's team. See Consar's heavy civil construction services or view completed projects across Ghana and West Africa for reference.
Building across West Africa
Consar supplies and places concrete beyond Ghana too, including the raft and basement pours at the MSC Head Office in Benin (see the construction progress update) and civil works on mine sites in West Africa. View completed projects across Ghana and West Africa.
Related reading
- Road Construction in Ghana: Civil Infrastructure and Haul Roads
- Construction Progress at the MSC Head Office in Benin
- Consar Mining Services: Leading Mining Service in Ghana
Explore Consar's ready-mix concrete and heavy civil construction, or contact the team to discuss your project.




